Convert To Job - Leica Captivate Technical Reference Manual

44.11
Description
Access
Convert to Road Job/
Convert to Rail Job
Roads - Alignment Editor
Field Option
Chainage Editable field
ahead
Next step
OK to create the chainage equation or to store the edited chainage equation.

Convert to job

Allows the onboard conversion of existing LandXML alignments including hori-
zontal alignment, vertical alignment, cross sections and chainage equations to
a Roads job.
In Alignment Editor Menu highlight Convert to job. Press OK.
Description of fields
Field Option
Convert Display only
alignment
To road job Selectable list
To rail job Selectable list
Geometry
to be con-
verted
Horiz & ver-
tical align-
ment
Horizontal
alignment
only
Horiz, verti-
cal, cross
section
Description
Chainage ahead. Type in or edit the value.
Description
Displays the modified or newly created align-
ment to be converted.
The Road job to which the alignment is con-
verted. Create a job. Available if the Align-
ment type is set to Road in Choose Align-
ment.
☞
If a new job with the same name
as an existing job must be created,
then the existing job must be
deleted first.
The Rail job to which the alignment is con-
verted. Create a job. Available if the Align-
ment type is set to Rail in Choose Align-
ment.
☞
If a new job with the same name
as an existing job must be created,
then the existing job must be
deleted first.
Defines the mode to be used for the conver-
sion process.
Only horizontal and vertical alignment is con-
verted.
Only horizontal alignment is converted.
Horizontal alignment, vertical alignment and
cross sections are converted. Only available
for road jobs.
737