Coding,
Linework page
322
Field
Option
Last used
Prompt for
Always
mandatory
prompt
attributes
Only if no
value
When code
is changed
Next step
For Coding functionality: Create linework, Page changes to the Linework
page.
For Coding functionality: Only code pts (no linework), Page changes to
the Quickcoding page.
The flags for Linework are defined on this screen. A flag
is stored as a property of a point.
•
can be exported with a format file.
•
•
is different to a code.
The flags defined on this screen are linked to the options available for Line-
work in an app. The selection for Linework determines the flag stored with a
point. Refer to "27.2 Coding functionality: Create linework" for information on
Linework.
Description of fields
Field
Option
Begin line
Editable field
Begin 3 pt
Editable field
arc
Continue
Editable field
line
Begin spline
Editable field
Description
When available, the last used attribute values
as stored in the job are displayed and stored.
A panel to enter mandatory attributes always
appears when codes being stored have one
or more attributes of attribute type manda-
tory. Attributes of attribute type mandatory
or fixed can only be created in Infinity.
A panel to enter mandatory attributes only
appears when codes being stored have one
or more attributes of attribute type manda-
tory, without an attribute value. Attributes of
attribute type mandatory must always be cre-
ated in Infinity.
A panel to type in mandatory attributes only
appears when a new code with a mandatory
attribute was selected.
Description
Opens a new line when the next point is
stored. Any lines which are currently open
are closed. The point can be stored with a
point code.
Stores the linework flag for a curve through
the next three measured points and contin-
ues a line.
Indicates a line is open.
Stores the linework flag for beginning either
a spline or a best fit arc and continues any
open line.
Settings - Customisation