Table of Contents
Advertisement
Settings
10.6
Requirements
Access
Import Alignment
Data
Job Menu - Import data
Description of fields
Field
Option
Linear unit
Selectable list
used within
file
Next step
OK leads back to Import DTM Data.
Importing Alignment Data
The requirements depend on the file type:
For MX Genio: At least one file in MX Genio format with the file extension
•
*.dxf is stored in the \DATA directory of the data storage device.
•
For LandXML/Terramodel/Japan XML: At least one file in LandXML/Ter-
ramodel/Japan XML format with the file extension *.xml is stored in the
\DATA directory of the data storage device.
•
For MX Genio: At least one file in MX Genio format with the file extension
*.txt is stored in the \DATA directory of the data storage device.
•
For Carlson: At least one file in Carlson format with the file extension *.cl
is stored in the \DATA directory of the data storage device.
From the job menu select Import data\Alignment.
Key
Description
OK
To import the data.
Fn Settings
To define the format of the data to be imported. Available
for Data type to import: MX Genio, Data type to
import: DXF and Data type to import: Carlson.
Description of fields
Field
Option
Data type
Selectable list
to import
From
Selectable list
From file
Selectable list
Description
Choosing the unit for the DXF data to be
imported.
Description
Defines which type of data is imported.
Defines from which storage device the data
is imported.
For Data type to import: DXF: All files with
extension *.dxf in the \DATA directory on the
data storage device can be selected.
127
Advertisement
Table of Contents
