Table of Contents
Advertisement
Setup Results,
Quality page
890
Key
Description
Scale
To type in values for the scale corrections. Refer to "New
Job,TS scale page".
Unavailable for setup methods Transfer height and Orien-
tate to object.
ppm/Scale
To switch between displaying the setup scale factor and the
fctr
setup ppm.
Page
To change to another page on this panel.
Fn 3 param
Switches between a 3 parameter and 4 parameter calcula-
or
tion. For 3 parameter, the current scale is not applied to
Fn 4 param
setup observations for a new setup calculation. For 4 param-
eter, the current scale is applied. The setup coordinates are
automatically updated according to the setting used. Defaults
to 4 parameter.
Available for setup method Resection.
Description of fields
Field
Option
Point ID
Display only
Instrument
Editable field
height
Point code
Selectable list
Current
Display only
PPM / Cur-
rent scale
Next step
Page changes to the Quality page.
For a description of the softkeys refer to "Setup Results,Setup page".
This page is not available for setup methods Transfer height or Orientate to
line.
Description of fields
Field
Option
New orien-
Display only
tation
Difference
Display only
in height
Description
ID of the current setup.
The current instrument height.
Select a point code for the setup point if
desired.
The current job scale. Refer to " New Job,TS
scale page" for more information on scale
corrections.
Description
New oriented azimuth with running angle as
telescope moves.
Available for setup method Multiple back-
sights.
Delta height, the difference between original
and calculated height.
Available for setup method Multiple back-
sights.
Setup - TS
Advertisement
Table of Contents
