Leica Captivate Technical Reference Manual page 914

Description of fields
Field
Enable pre-
plot point
test
Enable navi-
gation test
914
Option Description
Check box The preplot point test is done each time the
current point ID selection changes in the
Seismic Stakeout panel. The preplot point
position is tested against exclusion zones
and an appropriate warning message appears
when the position is inside one or more
zones.
Check box The navigation test is done continuously on
the current measured position. The current
position is tested against all exclusion zones
in the surrounding area as defined by Dis-
play radius.
Appears in 3D viewer when the
measured position falls inside one or
more exclusion zones.
In addition, the touched zone is
highlighted in red in the 3D viewer
(that could be more than one zone).
Seismic Stakeout