Table of Contents
Advertisement
Auto Points - Offset
1,
Code page
942
Field
Option
Height off-
Editable field
set
Identifier
Editable field
Prefix/suffix
Prefix
Suffix
Next step
Page changes to the Code page.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
New attrb
To create more attributes for the selected code.
Last
To recall the last used attribute values for the selected code.
Default
To recall the default attribute values for the selected code.
Page
To change to another page on this panel.
Description of fields
Field
Option
Code
Selectable list
Attributes
Editable field
Description
The height offset between ‑100 m and
100 m from the related auto point.
The identifier with up to four characters is
added in front of or at the end of the ID of
the auto point. This ID is then used as the
point ID for the related offset point. This
functionality could support an automatic
workflow into CAD packages including setting
symbols and stringing lines.
Adds the setting for Identifier in front of
the auto point ID.
Adds the setting for Identifier at the end of
the auto point ID.
Description
The code for the offset point.
The attributes are shown as display only,
editable field or selectable list depending on
their definition.
Up to eight attribute values can be stored.
Measure - Auto Points
Advertisement
Table of Contents
