Table of Contents
Advertisement
Edit Surface,
Edit Surface page
59.4.4
Access
Volumes & Surfaces
Field
Option
Point ID of
Display only
last stored
point
Date stored
Display only
Time stored
Display only
Surface sta-
Triangula-
tus
tion done
Triangula-
tion needed
Next step
Page changes to the Points page.
Key
Description
OK
To accept all settings and continue with the next panel.
Add all
To add one point from the job to the surface.
Clear one
To remove one point from the surface.
Boundry
To use this point for the boundary.
Page
To change to another page on this panel.
Fn Settings
To configure the Volume Calculations app. Refer to "59.3
Configuring Volumes & Surfaces".
Fn Add all
To add all points from the job to the surface.
Fn Clear all
To remove all points from the surface.
Next step
OK continues to Surface Task Selection.
Choosing an Existing Surface
Select Choose an existing surface in Volume Calculations.
Description
ID of the last measured point of the chosen
surface.
Date of the last measured point of the
chosen surface.
Time of the last measured point of the
chosen surface.
The surface has been triangulated and not
been modified since the last triangulation.
The surface has been modified since the last
triangulation or no triangulation exists.
971
Advertisement
Table of Contents
