Leica Captivate Technical Reference Manual page 757

Stake/Check panel,
page
Roads - Road
Field Option
Chainage Editable field
increment
Next step
Page changes to the
Refer to "Stake,pageCheck panel,page" for a description of keys.
Description of fields
Field Option
Use offsets Check box
Offset Editable field
Description
In 3D viewer, the current chainage is dis-
played without arrow symbols.
Chainage increment. Value by which the
nominal chainage increases/decreases when
pressing Ch -/Ch +.
page.
Description
When this box is checked, the defined stake/
check offsets are applied.
Available for Stake. Horizontal offset from the
reference line of the point to stake.
☞
When a stake offset is entered for
line, local line, manual slope and
local manual slope and Use non-
perpendicular offset is checked
on the
corner when working at a stake
chainage along an alignment,
choose one of the following from
the message:
Previous: To stake out the point accord-
•
ing to the tangent direction of the previ-
ous line.
Average: To stake the average tangent
•
direction. The stake distance from the
corner is the offset value defined.
Next: To stake out the point according
•
to the tangent direction of the next line.
page: When coming to a
757