Configuring Offset Points - Leica Captivate Technical Reference Manual

56.4.2
Requirements
Access
Auto Points - Offset
1,
General page
Measure - Auto Points
P9
2
P6
1
P2
P7
P3
d1
P1
P4
d2
TS_045

Configuring Offset Points

For GS, configure Store points: To DBX (pts&codes) in Measure Settings,
Automatically measure pts page.
Press Offset 1 or Offset 2 in the Measure on the
Key Description
OK To accept changes and return to the panel from where this
panel was accessed.
Offset 2 and To switch between configuring offset point type one and
Offset 1 two.
Page To change to another page on this panel.
Description of fields
Field Option
Store offset Check box
1 points and
Store offset
2 points
Horizontal Editable field
distance
For TS:
P1
P8
P2
P3
P5
P4
P10
P5
P6
P7
P8
P9
P10
d1
d2
α1
α2
Description
Activates logging of offset points.
☞
All other fields on the panel are
active and can be edited with this
setting.
The horizontal offset between ‑1000 m and
1000 m at which the offset point is collected.
First auto point
Second auto point
First offset point for P1
Second offset point for P1
Third auto point
First offset point for P2
Second offset point for P2
Fourth auto point
First offset point for P5
Second offset point for P5
Horizontal offset to the left
Horizontal offset to the
right
Angle between P1 and P5
Angle between P2 and P8
page.
941