Leica Captivate Technical Reference Manual page 819

Scan Profile,
Scan area page
Roads - Tunnel
Key Description
Fn Tools Available for Stake tunnel. To access the toolbox. Refer to
"47.4 The Toolbox".
Description of fields
Field Option
Point ID Editable field
Stake chain- Editable field
age
Chainage Editable field
increment
Target Editable field
height
Next step
Page changes to the Offsets page.
Key Description
Scan Available for automatic scanning. To start the scanning proc-
ess. Refer to "During a scan".
Stop Available for automatic scanning. To stop the scanning proc-
ess.
Pause To pause the scan.
Resume To restart scanning.
Get Ch Point the telescope to the start or end chainage and press
Get Ch to measure to the start/end chainage.
Measure Available for manual scanning. To measure a distance and
store distance and angles.
Description
The point identifier of the point to be
staked.
Available for Stake tunnel. The defined or
approximate chainage of the point to be
staked out.
Available for Stake: Stake profile.Chainage
increment. Value by which the nominal chain-
age increases/decreases when pressing Ch
+/Ch -.
Define a chainage increment for points
staked at more than one chainage.
Available for Stake: Check profile. The
height of the prism. If a prism is used, type
in the vertical difference between the point
to be measured and the point of the prism
pole.
819