Table of Contents
Advertisement
Settings - Point storage
Field
Option
Instantane-
ous
Stop & go
indicator
Time,
Observa-
tions or
Number of
satellites
Automati-
Check box
cally store
point
Check qual-
Check box
ity before
storing
Check
Position
only,
Height only
or
Position &
height
Tolerance
Editable field
Stop measurement based on: Accuracy or Positions
b
c
1
2
3
4
d
GS_046
Description
Records the time tag when Measure is
pressed. A coordinate is interpolated
between the positions at the neighbouring
two epochs to filter out effects of slight
movement. Recommended when measuring
positions of objects while the antenna is
moving very fast.
Example: Measuring the position of lamp-
posts by driving in a car along the road and
pressing Measure when the car is next to
the lamppost. Refer to the diagram below.
Available when raw data logging is config-
ured.
The occupation time is based on a user-
defined baseline length, the number of satel-
lites and the GDOP.
Available when working without real-time
device and when raw data are recorded for
post-processing.
Stores points automatically after stopping the
point occupation. If Automatically stop
point measurement and Automatically
store point are checked, then points are
recorded by pressing one key.
If activated, the limit defined in Tolerance is
checked before storing a point. A warning
signal is given when the limit is exceeded.
The type of coordinate quality to be checked
before storing a point.
The maximum acceptable coordinate quality.
a
Time in epochs
b
Measure pressed
c
Stop pressed
a
d
Post-processed coordinates
5
computed by averaging result-
ing positions of epochs 2 and 3
301
Advertisement
Table of Contents
