Table of Contents
Advertisement
Satellite Health
246
Key
Description
Health
Available for Satellite health: User defined. To configure
the satellites used.
Page
To change to another page on this panel.
Description of fields
Field
Option
Cut-off
Editable field
angle
DOP limit
None,
GDOP,
HDOP, PDOP
or VDOP
Limiting
Editable field
value
L2C tracking
Always
track
Automatic
Satellite
health
Automatic
User
defined
Next step
Health changes to Satellite Health.
The panel contains a page for each GNSS system the receiver is configured to
track. The explanations given for the softkeys are valid for all pages.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Use
To change between the options for the metadata User.
Description
Sets the elevation in degrees below which
satellite signals are not recorded and are not
shown to be tracked. Recommended set-
tings:
For real-time: 10°.
•
•
For purely post-processing applications:
15°.
If activated, the limit defined in Limiting
value is checked. GNSS positions are unavail-
able when the limit is exceeded.
The maximum acceptable DOP value.
Available unless DOP limit: None.
L2C signals are always tracked. The system
uses the L2C signals instead of L2P signals, if
available.
L2 signals which are flagged as unhealthy are
not recorded or used for real-time computa-
tions.
Sets the satellite tracking behaviour.
☞
This setting is remembered when
the instrument is turned off.
The instrument monitors incoming satellite
signals. Data from signals which are flagged
as unhealthy is not recorded or used for real-
time computations.
Satellites must manually be included/exclu-
ded from data recording and real-time com-
putations with Health.
Instrument - Base Settings
Advertisement
Table of Contents
