Table of Contents
Advertisement
Auto Points Page Con-
tent
Measure - Auto Points
Field
Option
Press 'Start'
in Measure
app
Do not
Check box
store point
if 3D CQ
exceeds
limit
3D quality
Editable field
limit
Beep when
Point is
stored
3D quality is
exceeded
Never
Next step
IF the page content
is not to be configured
is to be configured
Key
Description
OK
To accept changes and to return to previous panel.
Clear
To set all fields to Unused line.
Fn Default
To recall the default settings.
Description
Logging of auto points starts upon pressing
Start on the
page in the Measure app.
Available for GS.
If checked, monitoring of the coordinate
quality is activated. Auto points are stored
when the coordinate quality is within the
defined limit. For example, only phase fixed
solutions can be logged by defining a CQ
limit.
Available for GS if Do not store point if 3D
CQ exceeds limit is checked.
Limit for the coordinate quality above which
an auto point is no longer automatically
stored. When the CQ of the auto point falls
again below the defined value then the stor-
ing of auto points begins again.
Available for GS.
Instrument beeps when storing an auto
point.
Instrument beeps when auto points are not
stored.
Instrument never beeps.
THEN
OK closes the panel and returns to
the previous panel.
Content.
933
Advertisement
Table of Contents
