Leica Captivate Technical Reference Manual page 824

Field
Height off-
set
Point ID
Profile dis-
tance
Top dis-
tance
Profile off-
set
Profile
increment
Element
number
% of ele-
ment
Check off-
set
Check
height diff
Drill hz
angle
Drill vertical
angle
824
Option Description
Editable field Applies a vertical offset to the centreline.
Available for Offset method: Offset &
height.
Selectable list Available for Offset method: Point from
design.
Editable field The distance from start of design profile.
Available for Offset method: Profile, dist
& offset.
Editable field The distance from the top of the tunnel.
Available for Offset method: Dist from
top&offset.
Editable field The offset from the design profile. Available
for Offset method: Profile, dist & offset,
Offset method: Dist from top&offset and
Offset method: Element & offset.
Editable field To increment the distance for offset defini-
tions as distance and offset. Available for
Offset method: Profile, dist & offset and
Offset method: Dist from top&offset.
Editable field Element number 1 is the first element of the
design profile. Available for Offset
method: Element & offset.
Editable field Distance in percentage terms of the meas-
ured point along the design profile element.
Available for Offset method: Element &
offset.
Editable field Available for Stake: Check profile. Applies a
horizontal offset perpendicular to the centre-
line used for comparing to the measured
point.
Editable field Available for Stake: Check profile. Applies a
vertical offset to the centreline used for com-
paring to the measured point.
Editable field The horizontal direction 0 is along the cen-
treline of the tunnel alignment.
Tunnel_034
Drill hz angle
α
Editable field The vertical direction 0 is along the centreline
of the tunnel alignment.
Roads - Tunnel