Battery / Memory; Camera - Leica Captivate Technical Reference Manual

Table of Contents

Advertisement

5.9.2
Battery & Memory
5.9.3
Taking a picture step-
by-step
50

Battery / memory

Key
Page
Description of fields
Field
Battery, Battery 1
or Battery 2
TS external power,
GS external power
or
CS external power
Internal memory,
SD card or USB
stick

Camera

1.
Aim the camera to the desired target.
2.
Check the view at the display.
3.
Click Capture to take the picture.
Capture changes to Store.
4.
Click Store.
The image is stored in the DBX\JOB\IMAGES folder of the
data storage device.
Description
To change to another page on this panel.
Description
The percentage of remaining power capacity for the
internal battery is displayed numerically. If no infor-
mation for a field is available, for example no battery
is inserted, then ----- is displayed.
On the MS60/TS60, if the battery gets
charged, (charging) is stated behind the
percentage of the battery power level.
When the battery is getting low on the TS,
a warning message is displayed on the CS.
Shows if an external power supply is connected.
If an external battery is connected, the percentage of
remaining power capacity is displayed numerically.
Applies also to wall plugs.
The total/free memory for data storage on the data
storage device. If no information for a field is availa-
ble, for example no data storage device is inserted,
then ----- is displayed.
The CS35 has two USB ports. The USB
stick, that was inserted first, is used.
Icon Pop-up Bubbles

Advertisement

Table of Contents
loading

Table of Contents