Leica Captivate Technical Reference Manual page 70

Description of fields
Field
Use a DTM
DTM
Layer
Date cre-
ated
Use a road
design
Road design
Use a rail
design
Rail design
70
Option Description
Check box When this box is checked, a DTM job can be
selected. A DTM job holds DTM (Digital Ter-
rain Model) or TIN (Triangular Irregular Net-
work) data. The files are stored in the \DBX
folder or a subfolder of \DBX.
Selectable list Holds DTM (Digital Terrain Model) data or
TIN (Triangular Irregular Network) data. The
DTM job to be used must be stored in the
\DBX directory on the active data storage
device.
The DTM job is a read-only source of infor-
mation and cannot be selected as a job.
☞
Display only A DTM job can consist of multiple DTM layers
or selectable or surfaces. These DTM layers can cover dif-
list ferent locations, be on top of each other or
intersect each other.
If there is only one layer in the DTM job, the
layer name is displayed as an output. If there
are multiple layers, the layer to display in 3D
viewer can be selected.
Display only The date of when the job was created.
Check box When this box is checked, a road design can
be selected. Contains all the information
about the road design. For example, the
geometry of the line, the formation layer of
the road or the information related to the
construction of cuttings and embankments.
Selectable list The files are stored in the \DBX folder or a
subfolder of \DBX.
The data is either typed in manually in the
Alignment editor app or converted from a
road design package.
The road job is a read-only source of infor-
mation and cannot be selected as a job.
The selected Road design is visible in 3D
viewer.
Check box When this box is checked, a rail job can be
selected.
Selectable list Contains all the information about the rail
design including the geometry of the centre-
line and the rail definition (superelevation).
The files are stored in the \DBX folder or a
subfolder of \DBX.
The selected DTM job is visible in
the 3D viewer.
Job Menu - Jobs