Two Auto Points; Three Or More Auto Points - Leica Captivate Technical Reference Manual

Two auto points

The configured offsets are applied perpendicular to the line between two auto
points.
P2
d1
GS_061
P3
d1
TS_044

Three or more auto points

The first offset points are computed perpendicular to the line between the first
and the second auto point.
The last offset point is computed perpendicular to the line between the last
auto point and the one before.
All other offset points are computed on a bearing. The bearing is half of the
angle between the last and the next measured auto point.
P2
d1
GS_062
940
P4
P1
P0
d2
P3
P5
P2
P1
d2
P4
P8
P4
P5
P1
P6
P0
P3
d2
For GS:
P0 First auto point
P1 Second auto point
P5 P2 First offset point for P0
P3 Second offset point for P0
P4 First offset point for P1
P5 Second offset point for P1
d1 Horizontal offset to the left
d2 Horizontal offset to the
right
For TS:
P1 First auto point
P2 Second auto point
P4 First offset point for P1
P6
P3 Second offset point for P1
P5 First offset point for P2
P6 Second offset point for P2
d1 Horizontal offset to the left
d2 Horizontal offset to the
right
For GS:
P0 First auto point
P7
P1 Second auto point
P2 First offset point for P0
P3 Second offset point for P0
P4 Third auto point
P5 First offset point for P1
P9 P6 Second offset point for P1
P7 Fourth auto point
P8 First offset point for P4
P9 Second offset point for P4
d1 Horizontal offset to the left
d2 Horizontal offset to the
right
Angle between P0 and P4
α1
Angle between P1 and P7
α2
Measure - Auto Points