Combined Adjustment (L, T, I, C, Atrplus And Telescope Camera) - Leica Captivate Technical Reference Manual

22.7.4
Access
Description
☞
268
Next step
IF you want to
determine the instrument errors
view the current values
configure Check & adjust
adjust the circular level
inspect the laser plummet
adjust the tripod

Combined Adjustment (l, t, i, c, ATRplus and Telescope Camera)

In Check & Adjust, What do you want to do? select Check & adjust the
compensator, index error, line of sight error & automatic target aiming
or Check & adjust the compensator, index error, line of sight error, auto-
matic target aiming & telescope camera and press Next.
The combined adjustment procedure determines the following instrument
errors in one process:
Instrument error
l, t
i
c
ATRplus Hz
ATRplus V
Telescope camera Hz
Telescope camera V
Before determining the instrument errors, the instrument has to be:
• levelled up using the electronic level
protected from direct sunlight
•
acclimatised to the ambient temperature, approximately 2 minutes per °C
•
difference compared to the storage place.
THEN
select one of the three available
check and adjust procedures and
refer to the relevant subchapters.
select View the current values.
Refer to "22.7.7 Viewing the Current
Values".
select Check & adjust settings.
Refer to "22.7.8 Configuring Check
& adjust"1.
Refer to "22.7.9 Adjusting the Circu-
lar Level of the Instrument and Tri-
brach".
Refer to "22.7.11 Inspecting the
Laser Plummet of the Instrument".
Refer to "22.7.12 Servicing the Tri-
pod".
Description
Compensator longitudinal and transversal index
errors
Vertical index error, related to the standing axis
Horizontal collimation error, also called line of
sight error
ATRplus zero point error for horizontal angle
ATRplus zero point error for vertical angle
Telescope camera zero point error for horizontal
angle - option
Telescope camera zero point error for vertical
angle - option
Settings - TS instrument