Table of Contents
Advertisement
Road Settings,
Info page
642
Next step
Page changes to the Info page.
Two things can be configured on this page:
1.
The required information for each stakeout and check method to be dis-
played on the
page. Depending on the working method used on the
construction site, different information is written on the stakes. The infor-
mation to be written on the stake is displayed on the
2.
If and which user-defined page is displayed.
Key
Description
OK
To confirm the changes and continue.
Clear
To clear all parameters from all lines.
Fn Default
To set the default value for all lines.
Fn About
To display information about the app name, the version num-
ber, the date of the version, the copyright and the article
number.
Description of fields
Field
Option
Show user
Check box
defined
page
Page to
Selectable list
show
Method
Display only
1st line to
Selectable list
16th line
Description
The user-defined page to be shown in the
stake or check panel.
The names of the available pages.
The method is based on the selected subapp
and, if available, the setting for Stake. The
settings in the following lines can only be
changed for the current method.
The method defines the parameters available
to view on the
page of the app. Different
combinations of the parameters to view can
be stored
To modify the selection on any particular line,
place the cursor on the line to modify using
the arrow keys and press the ENTER key.
Use the arrow keys to select the required
parameter and press the ENTER key to con-
firm the choice.
page.
Roads - General
Advertisement
Table of Contents
