Description Of The Measure To Line/Stake To Line Tasks - Leica Captivate Technical Reference Manual

☞
Task
566
The lines are stored in the selected design job.
The measurements are stored to the selected job.
The coordinate systems in the design job and in the job must match, otherwise
a warning message appears to prevent any further step.
Key Description
OK To select the highlighted option and to continue with the
subsequent panel.
Fn Settings To configure the Measure to line/Stake to line app.

Description of the Measure to line/Stake to line tasks

For Measure to line
Task Description
Line Measure relative to a line by viewing the distance, offset &
height values.
Line with Measure relative to a line by viewing the distance, offset &
slope height values. Additionally view position relative to a defined
slope from the line.
Segment Measure relative to a line segment by viewing the distance,
offset & height values. A segment may be an individual
straight or arc, or a segment within a line.
Segment Measure relative to a line segment by viewing the distance,
with slope offset & height values. Additionally view position relative to a
defined slope from the line.
Quick Line Create a temporary line from 2 points & measure relative to
it by viewing the distance, offset & height values.
For Stake to line
Task Description
Line Stakeout relative to a line by defining the distance, offset &
height.
Line with Stakeout relative to a line by defining the distance, offset &
slope height. Additionally view position relative to a defined slope
from the line.
Grid Define & stakeout a grid of points relative to a line.
Measure to line/Stake to line