Table of Contents
Advertisement
27.3
27.3.1
Requirements
Coding
27.3.2
Requirements
Coding
c
b
b
b
b
b
a
008160_002
008161_002
a Begin line
a Begin
b Continue
line
b Continue
c End line
c End spline
Coding functionality: Only code pts (no linework)
Point Coding with Dynamic List
Coding functionality: Only code pts (no linework) is selected in Cod-
•
ing.
Allow new codes to be created is checked in Coding.
•
The user-defined page with a field for codes must be configured.
•
1.
Click in the field Code or Code (auto) in a user-defined page in an
app.
2.
Type in a point code or select a code from the list.
3.
Type in attribute if defined.
4.
Press Measure.
Point Coding without Dynamic List
•
Coding functionality: Only code pts (no linework) is selected in Cod-
ing.
Allow new codes to be created is not checked in Coding.
•
•
The user-defined page with a field for codes must be configured.
c
b
b
a
a
008162_002
a Begin line
spline
b Continue
line
line
c Close line
b
b
b
c
a
008163_002
a Begin best
fit arc
b Continue
line
c End best
fit arc
331
c
Advertisement
Table of Contents
