Measuring To A Line - Leica Captivate Technical Reference Manual

Define Slope
41.5
Description
582
Key Description
OK To accept changes and to continue with the subsequent
panel.
Fn Settings To configure the Measure to line/Stake to line app.
Description of fields
Field Option
Line Display only
Slope direc-
tion
Left down
Right down
Left up
Right up
Slope Editable field
Hinge hori- Editable field
zontal off-
set
Hinge verti- Editable field
cal offset

Measuring to a Line

The horizontal and vertical position and the distance along line/chainage of a
manually measured point can be calculated relative to the defined line.
Information can be measured and displayed in the
Refer to "Settings,Info page".
Description
The current line.
The method how the slope is created.
Creates a downward plane extending to the
left of the defined line.
Creates a downward plane extending to the
right of the defined line.
Creates an upward plane extending to the
left of the defined line.
Creates an upward plane extending to the
right of the defined line.
Inclination of the slope.
Horizontal offset from the line that sets
where the slope starts.
Vertical offset from the line that sets where
the slope starts.
page, and then exported.
Measure to line/Stake to line