38.8
38.8.1
Access
COGO Shift, Rotate,
Scale
504
On the 3D viewer page, the known points defining the line and those points
created on the line are shown.
COGO Calculation - Shift, Rotate & Scale
Selecting the Shift, Rotate & Scale Method and the Points to be
Moved
Select Shift, rotate & scale from the COGO menu.
Key
Description
OK
To select a method and to continue with the subsequent
panel.
Description of the Shift, Rotate & Scale methods
Shift, Rotate & Scale
methods
Manually entered
Description
Applies shifts and/or rotation and/or scale to
one or several known points. The values for
shifts and/or rotation and/or scale are typed
in manually.
Elements that must be known are
•
the coordinates of the points to be shif-
ted, rotated and/or scaled. They must be
stored in the job.
•
the shift values. They can be defined as:
the direction of Easting, Northing and
Height, or as an azimuth and a grid dis-
tance, or as shift from one point to
another.
•
the rotation value. It can be defined by a
point as rotation centre plus a rotation
or by an existing and new azimuth.
•
the scale. It is only applied to the posi-
tion, not to the height.
Points with full coordinate triplets, position
only points and height only points can be
used.
COGO