Creating A Reference Surface; From Existing Scans; From Existing Points - Leica Captivate Technical Reference Manual

60.4
60.4.1
Access
Select Scans
60.4.2
Access
Select Points,
3D viewer page
Inspect Surfaces
Description of fields
Field Option
Distance Editable field
Colour Selectable list

Creating a Reference Surface

From Existing Scans

Select From existing scans in Define Reference Surface.
Check the box in front of a scan ID to select a scan to use.
Uncheck the box in front of a scan ID to deselect a scan.
Key Description
OK To continue to the next panel.
Fn Settings To configure the app. Refer to "60.3 Configuring Inspect sur-
faces".
Fn Delete To delete the highlighted scans.
Fn None or To deactivate or activate all scans for the reference plane
Fn All definition.
Next step
OK to access Define Object to Compare.

From Existing Points

Select From existing points in Define Reference Surface.
Tap on the points forming the reference surface.
Or select a point from the points list on the Points page. Refer to "7.2 Access-
ing Data Management".
Description
Click in the field and enter a distance.
Tap outside the field to stop the editing
process.
The distance entered, is shown in the colour
selected in the adjoining Colour field is used.
For a smooth transition to the colour apply-
ing to the distance field below, the colours
are shaded.
The selected colour is used to display the
objects at the defined distance.
Click on the field to open the selectable list.
Scroll up and down to see the whole colour
range.
Tap on a colour for selection.
Tap outside the field to stop the selection
process.
983