Leica Captivate Technical Reference Manual page 634

Field
Apply scale
to horizon-
tal design
634
Option Description
Checked
☞
b
Road_094
a Any type of line or curve
b Extended line
c Projected point on extended line
Not checked
☞
b
Road_095
a Any type of line or curve
b Projected point on line
Check box When this box is not checked, no scale factor
is applied to length values. Length values are
displayed in the grid format.
When this box is checked, a defined scale
factor is applied to length values. All distance
values (chainages, chainage increments, off-
sets, Δ chainage, Δ offset, Δ height, ...) are
displayed in ground using the Scale factor.
☞
Intersection points on extended
lines/curves are not shown in cross
sections and cannot be staked out.
c
This option is recommended when
working with closed alignments,
for example roundabout, slip road,
motorway exit.
The Road job data is still in grid
format.
Roads - General
a
a