Table of Contents
Advertisement
59
59.1
Description
Volume calculations
tasks
Activating the app
☞
Point types
59.2
Access
Volume Calculations
966
Volumes & Surfaces
Overview
The Volume Calculations app allows surfaces to be measured and volumes (and
other information) to be computed from these surfaces.
The Volume calculations app can be used for the following tasks:
Measuring points (surface points and boundary points) defining a new sur-
•
face or extending existing surfaces from the job.
•
Calculating the triangulation of the measured surface points to establish
the surface.
Calculating volumes from a base (3D point, entered elevation) or by a
•
stockpile method.
The surface calculation can be made from:
•
existing point data in the job.
manually occupied points.
•
entered coordinates.
•
If the message panel appears which requires that the app must be activated
using a licence key then refer to "29.3 Load licence keys".
Volume Calculations are possible for RTK rover and TS.
Surfaces can be created from points stored as:
•
Local grid
Height mode can be ellipsoidal or orthometric.
•
Heights and positions are always taken into account. Points must have full
coordinate triplets.
Accessing Volumes & Surfaces
Select Leica Captivate - Home: Volume calc.
Key
Description
OK
To select the highlighted option and to continue with the
subsequent panel.
Volumes & Surfaces
Advertisement
Table of Contents
