Measuring Points To A Reference Plane - Leica Captivate Technical Reference Manual

Edit Plane,
Offset page
42.7
Access
610
Field Option
Orientation Selectable list
Point
Next step
Page changes to the Offset page.
Key Description
OK To compute and store the reference plane.
Meas app Available when Offset pt ID is highlighted. To measure a
point to define the offset point.
Page To change to another page on this panel.
Description of fields
Field Option
Use offset Check box
for plane
Offset Selectable list
plane
Offset pt ID Selectable list
Offset Display only
or editable
field
Next step
The 3D viewer page shows a graphical view of the reference plane.

Measuring Points to a Reference Plane

After creating or selecting a reference plane, select Measure to plane in
Measure to Plane.
Description
Available when Select a point of the plane
besides the origin point is selected. The
point which defines the orientation together
with the origin point.
Description
When this box is checked, an offset can be
defined for the reference plane.
An offset is defined by a point or a distance.
The defined plane is shifted along the Y axis
by the offset.
Available for Offset plane:Offset to a
point. Point ID of offset point.
Distance by which to offset the plane along
the Y axis.
For Offset plane:Offset by distance, the
distance can be entered.
For Offset plane:Offset to a point, the
calculated distance to the adjusted plane is
displayed. ----- if no values are available.
Reference Plane & Grid Scan