Inverse Between A Known Point And A Line - Leica TM30 Series Field Manual

2.4.3

Inverse Between a Known Point and a Line

Access
Calculating
Storing the results
step-by-step
COGO
Refer to "2.2 Accessing COGO" to access COGO Inverse.
Description of fields
Field
<Method:>
<Start Point:>
<End Point:>
<Azimuth:>
<HDist-XX:>
<Offset Point:>
Step Description
1. Press CALC (F1) to calculate the inverse result.
2. Press STORE (F1) to store the inverse result to the active job.
There are no points stored to the database, only the inverse result.
3. Inverse results can be exported from the job using a format file. The format
file is created with Format Manager in LEICA Geo Office.
TPS1200+/TS30/TM30
CALC (F1)
INV (F2)
LAST (F4)
SURVY (F5)
SHIFT CONF (F2)
SHIFT MODIF (F4)
PAGE (F6)
Option Description
2 Points or Pt/Brg/Dist.
The method for calculating the inverse
result.
Choicelist The point ID defining the start of the line.
Choicelist The point ID defining the end of the line.
Output The direction from the first point to the
second point.
Output The horizontal distance between the two
points.
Choicelist The point ID defining an offset to the line.
To calculate the result.
To calculate the inverse between two
points.
To select the values for distance and
offset from previous COGO inverse
calculations.
To measure a known point for the
calculation.
To configure the program
To modify the original azimuth,
distance or offset value.
To change to another page on the
screen.
19