Job Menu - Jobs; Creating A New Job - Leica Captivate Technical Reference Manual

6
6.1
Description
Type of jobs
Default job
Job
6.2
Access
New Job,
General page

Job Menu - Jobs

Job Menu - Jobs
Overview
Jobs
structure surveying projects.
•
contain all points, lines, images and scans that are measured/recorded and
•
stored.
can be downloaded to Infinity for post-processing or for data transfer to a
•
further program.
• can be uploaded from Infinity, for example, for stake out operations.
can be stored on the data storage device or the internal memory.
•
Data jobs. Explained in this chapter.
•
DTM files. Refer to "51.6 Staking Out a DTM or Points & DTM".
•
• Road alignment files.
A default job is available on the instrument after formatting the data storage
device, inserting a previously formatted data storage device or deleting all jobs.
Data is stored to a job. After formatting the data storage device, the default job
is used until a user-defined job is created and selected.
The properties of the job determine some system properties, such as the
codelist, coordinate system and TS scale factor.
When a job becomes the job, then the sort and filter settings of this job are
saved in the System RAM. If the data storage device is formatted then these
last used sort and filter settings are used for the default job.

Creating a New Job

Select Leica Captivate - Home: Tap here to create new job.
OR
In Leica Captivate - Home press Fn New job.
Key Description
Store To store the settings.
Page To change to another page on this panel.
53