Table of Contents
Advertisement
Access
Remote OWI Connec-
tions
18.11
☞
Description
☞
Connections - All other connections
For RTK rover:
In Connection Settings, GS connections page, highlight Remote
•
(OWI). Edit.
For CS35:
Unavailable. Use Windows to configure a connection.
•
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Control
To configure more parameters.
Device
Available unless an Internet connection is used. To create,
select, edit or delete a device. Refer to "20.2 Accessing Devi-
ces".
Description of metadata
Metadata
Description
Connection
The connection configured for the ports. Any port which is
not configured is automatically assigned the remote connec-
tion.
Device
The hardware connected to the chosen port.
PPS output
The PPS output is an optional interface requiring a special port.
PPS stands for Pulse Per Second. It is a pulse that is output at a specified
interval time. The pulse can be used to activate another device. Additionally, a
notification message can be output through the GS25 ports P1, P2, P3, P4 or
BT when a PPS output occurs.
For example, in aerial photography, an aerial camera can be configured to take
a photo each time it receives a pulse from the instrument.
The settings on this panel define the output port and parameters for the PPS
option. This panel is available if the instrument is fitted with a PPS output port.
This option is only available on GS25.
205
Advertisement
Table of Contents
