Create A New Surface By Using Grid Scan - Leica Captivate Technical Reference Manual

59.4.2
Access
New Surface
Volumes & Surfaces
Field Option
Antenna Editable field
height
3D quality Display only
Target Editable field
height
Hz Display only
V Display only
Horizontal Display only
distance
Difference Display only
in height
Next step
Measure all points. Then press Done.

Create a New Surface by Using Grid Scan

For TS:
Select Create a new surface by scanning a grid of points in Volume Calcu-
lations.
Description of fields
Field Option
Surface Editable field
name
Next step
OK to access Define Grid Scan Area.
Description
For GS:
The antenna height as defined in the active
working style is suggested. Changes in the
antenna height do not update the antenna
height as defined in the active working style.
The changed antenna height is used until the
app is exited.
For GS:
The current 3D coordinate quality of the
computed position.
For TS:
The last used target height is suggested
when accessing this panel. An individual tar-
get height can be typed in.
For TS:
The current horizontal angle.
For TS:
The current vertical angle.
For TS:
The horizontal distance after Distance was
pressed. No distance is displayed when
accessing the panel and after Store or
Measure.
For TS:
The height difference between setup and
measured point after Distance was pressed.
Displays ----- when accessing the panel and
after Store or Measure.
Description
The name/number of the new surface.
969