Table of Contents
Advertisement
Define Panoramic
Image
Panoramic Image Cap-
ture
386
OR
At the end of Setup, a panoramic image can be taken.
Description of fields
Field
Option
Image type
Rectangular
area
Multi-row
360° image
Single row
360° image
Polygonal
area
Next step
OK and follow the instructions on the panel to define the area.
Once the panoramic image area is defined then the Panoramic Image Cap-
ture panel opens.
Key
Description
Start
To start taking the panorama images.
Stop
To end taking the panorama images.
Pause
To pause taking the panorama images.
Resume
To continue taking panorama images after Pause has been
pressed.
Fn Exit
To exit the panel.
Description of fields
Field
Option
Images
Display only
taken
Images
Display only
remaining
% comple-
Display only
ted
Description
Area defined by upper left and lower right
corner
360° with one or more rows above each
other
360° in one row
Area defined by three or more corners in
clockwise direction.
Description
The number of captured images.
The number of images remaining to be
taken.
In percent, the number of images taken
against the total number of images which
must be taken.
Camera & Imaging
Advertisement
Table of Contents
