Table of Contents
Advertisement
Residuals in Set n
Sets of Angles - TS
Metadata
Description
For No:
The selected set is not used for calculations.
Next step
Points to access Residuals in Set n.
Key
Description
OK
To return to the previous panel.
Use
To set Yes or No for the Use metadata for the highlighted
point.
More
To view additional information.
Description of metadata
Metadata
Description
-
Point ID of the measured points in the order they were
defined and measured.
Hz Residual
Residual in the Hz value of the selected point within the sin-
gle set.
V Residual
Residual in the V value of the selected point within the single
set.
Avg Hz
Reduced Average Hz value of the point in all active sets.
Avg V
Average V value of the point in all active sets.
Mean Hz
Mean Hz value of the point within the single set.
Mean V
Mean V value of the point within the single set.
SD Residual
Residual in the distance value of the point within the single
set.
Avg SD
Average distance value of the point in all active sets.
Mean SD
Mean distance value of the point within the single set.
Use
For Yes:
The selected point is used for calculations in all sets.
For No:
The selected point is not used for calculations in any set.
865
Advertisement
Table of Contents
