Table of Contents
Advertisement
60.4.5
Requirements
Define Design Data
986
Field
Option
3D Face &
Polyface
mesh
3D Face ver-
tices
Points
From
Selectable list
From file
Selectable list
Next step
OK to import the data and to access Define Object to Compare.
From Road or Tunnel Design Data
The requirements depend on the selected file format:
•
Inspect Surfaces Road & Inspect Surfaces Tunnel are an option in the appli-
cation and an additional license for each one must be loaded to be availa-
ble.
•
At least one Road or Tunnel job has to be stored in the \DBX directory of
the data store device.
Key
Description
OK
To import the data.
Fn Settings
To configure the app. Refer to "60.3 Configuring Inspect sur-
faces".
Description of fields
Field
Option
Type of
Road or Tun-
design
nel
Layer
Display only
Description
When this option is selected, the 3D Face
and Polyface mesh entities are imported. The
triangulation is created based on the existing
model in the DXF.
When this option is selected, the three or
four points from the 3D Face entity are
imported. Only the points are imported. The
surface will be created based on the triangu-
lation settings.
When this option is selected, point objects
are imported.
Defines from which storage device the data
is imported.
For Data type to import: ASCII data
(point ID,E,N,Ht) and Data type to
import: ASCII data (point ID,N,E,Ht): All
files in the \DATA directory on the data stor-
age device can be selected.
For Data type to import: DXF data and
Data type to import: PTS data: All files
with extension *.dxf or *.pts in the \DATA
directory on the data storage device can be
selected.
Description
Availability depends on loaded license an
existing job.
The selection layer for the current Road/
Tunnel job.
Inspect Surfaces
Advertisement
Table of Contents
