Importing Dxf Data - Leica Captivate Technical Reference Manual

10.4
Requirements
☞
Access
Import DXF Data
124
Description of fields
Field Option
From Selectable list
From file Selectable list
Import Check box
points,
lines, coor-
dinate sys-
tems &
point codes
Import Check box
global
codelist
Import Check box
alignments
Import DTM Check box
Next step
OK start the import.

Importing DXF Data

At least one file in DXF format with the file extension *.dxf has to be stored in
the \DATA directory of the data storage device.
Do not remove the data storage device while importing the data.
From the job menu select Import data\DXF.
Description
Defines from which storage device the data
is imported.
All files with extension *.xml in the \DATA
directory on the data storage device can be
selected.
When the box is checked, a job can be selec-
ted to import the data to.
When this box is checked, a global codelist is
imported. The codelist must be stored in the
\CODE directory of the data storage device.
When the box is checked, the job type Road,
Rail or Tunnel can be chosen.
A job name can be entered and a Road, Rail
or Tunnel job is created once the data is
imported.
When this box is checked, a job name can be
entered and a DTM job is created once the
data is imported.
Job Menu - Import data