Table of Contents
Advertisement
Set Orientation,
Setup page
882
Field
Option
Backsight ID
Editable field
or display
only
Code
Selectable list
Code
Display only
description
Next step
Page changes to the Setup page.
Key
Description
Set
To set the setup and orientation and exit the Setup app.
Distance
To measure a distance to the point being used to set the azi-
muth. A distance measurement is NOT required when setting
the setup and the orientation with Set.
Store
Records displayed values temporarily. The target measure-
ments are not stored to the current job until the setup is set.
A distance measurement is not necessary before pressing
Store. After recording the measurement data, the next point
ID in the job is displayed. The instrument positions to the
point if enough data is available and the instrument is
robotic.
Scale fctr /
To switch between displaying the current scale as a scale fac-
ppm
tor or ppm value.
Page
To change to another page on this panel.
Description of fields
Field
Option
Point ID
Display only
Instrument
Editable field
height
Point code
Selectable list
Current
Display only
PPM / Cur-
rent scale
Description
Point ID of the backsight point.
The code for the backsight point.
A short description of the code.
Description
ID as selected in Choose Setup Point.
The instrument height.
The code for the backsight point.
The current job scale. Refer to " New Job,TS
scale page" for more information on scale
corrections.
Setup - TS
Advertisement
Table of Contents
