Creating/Editing A Transformation - Leica Captivate Technical Reference Manual

9.4.2
☞
Access
New Transformation
or
Edit Transformation,
General page
New Transformation
or
Edit Transformation,
Parameters page
New Transformation
or
Edit Transformation,
Advanced page
112

Creating/Editing a Transformation

Classic 3D transformations can be created.
In Transformations, highlight a transformation. A copy of this transformation
is taken for further configurations. Press New or Edit.
Key Description
Store To store the transformation.
Clear To set the editable fields to 0. Available on the Parameters
and the Advanced page.
Page To change to another page on this panel.
Description of fields
Field Option
Name Editable field
Type Display only
Next step
Page changes to the Parameters page.
Enter the known values of the transformation parameters.
Next step
Page changes to the Advanced page.
Select at least a height mode and a transformation model.
Description of fields
Field Option
Height Selectable list
mode
Description
A unique name for the new transformation.
The name can be up to 16 characters long
and include spaces.
No other transformations than Classic 3D can
be created.
Description
The type of heights to be computed.
Coordinate Systems