Leica Captivate Technical Reference Manual page 595

Stake +yyy.yy +xxx.xx
Measure to line/Stake to line
Field Option
Point ID
template
Next step
OK to accept changes and continue to the Stakeout panel.
The title of this panel indicates the position of the grid being staked, where
+yyy.yy is the chainage position along the grid line, and +xxx.xx is the grid line
offset.
The functionality of this panel is similar to the Stake Points panel. Differences
between the two panels are outlined here. Refer to paragraph "51.4 Staking
Out" for all other key and field explanations.
Key Description
Flip view or To reverse the graphical display top to bottom. A reversed
Flip view graphical display can be used when the point to be staked
lies behind the current position.
Skip point To skip the currently displayed chainage and increment to
the next chainage. Available when Measure is displayed.
Next line To start staking the next grid line. Moves grid stake point to
the next line (right) in the grid. There is no automatic Next
line when the end of the line is reached.
Description of fields
Field Option
Point ID Editable field
Target Editable field
height
Description
The point ID template as defined in the
active working style is used. The point ID
template can be defined in Leica Captivate
- Home:Settings\ID templates.
Description
The point ID of the grid point to be staked.
The point ID is based on the selection for
Store point using in Define Grid. If a dif-
ferent point ID is typed in, the next point ID
will still be shown as the next automatically
computed point ID.
For TS:
The last used target height as defined is sug-
gested. An individual target height can be
typed in.
595