Table of Contents
Advertisement
38.8.2
Computed Parame-
ters,
Shift page
508
a
P5'
P5
P1
P2
P3
P2'
SYS13_006
Manually Entered
Key
Description
Calculate
To perform the shift, rotation and scale calculation and to
continue with the subsequent panel. Calculated COGO points
are not yet stored.
Inverse
To calculate the amount of shift in Easting, Northing and
height from two existing points. Available if Azimuth, Hori-
zontal distance, Difference in easting, Difference in
northing or Height difference is highlighted.
Last Inv
To select the value for the shift from previous COGO inverse
calculations. Available if Azimuth, Horizontal distance,
Difference in easting, Difference in northing or Height
difference is highlighted.
Meas app
To measure a point manually for the COGO calculation. Avail-
able for Method: Use 2 points if From or To is highlighted.
Page
To change to another page on this panel.
Fn Settings
To configure the COGO app. Refer to "38.3 Configuring
COGO".
Fn Modify
To modify the values manually. Available if Azimuth, Hori-
zontal distance, Difference in easting, Difference in
northing or Height difference is highlighted.
Scale
a
Height
b
Easting
P1 Rotation point, can be held
fixed, all other points are
P4'
then scaled from here
P4
P2 Known point
b
P2' Scaled point
P3 Known point
P3' Scaled point
P3'
P4 Known point
P4' Scaled point
P5 Known point
P5' Scaled point
COGO
Advertisement
Table of Contents
