Table of Contents
Advertisement
Dial-Up Connection
19.3
Description
Connections - All other connections,
Control Key
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Near
To find the nearest base station with a modem. Available
when base stations to dial are already created in Dial-up
Connection List. Coordinates of these stations must be
known.
Fn Com-
To send AT commands to the modem.
mand
Description of fields
Field
Option
Modem
Display only
Dial-up con-
Selectable list
nection
Number
Display only
Protocol
Display only
Radios for GPS Real-Time
For radios the channels on which the radio broadcasts can be changed. Chang-
ing channels changes the frequency at which the radio operates. Not all radios
support channel changing.
Changing radio channels is of interest in three cases.
Case 1:
Two real-time base stations are set up at two locations, each
broadcasting on a different channel.
If the signal from one base station is jammed, the channel
can be changed and the other base can be used.
Description
The type of modem highlighted when this
panel was accessed.
The modem base station to be dialled. Open
the selectable list to access Dial-up Connec-
tion List where new base stations can be
created and existing base stations can be
selected or edited. Refer to "19.6 Configur-
ing the Stations to Dial".
The number of the modem at the selected
Dial-up connection as configured in Dial-
up Connection List.
The configured protocol of the modem at the
selected Dial-up connection as configured
in Dial-up Connection List.
225
Advertisement
Table of Contents
