Leica Captivate Technical Reference Manual page 852

Settings,
Tolerances page
852
Field Option
No time out
1sec to
60sec
Re-measure
points
Never
Automati-
cally
Manually
Sort points Check box
by Hz angle
Define time Check box
when sets
should be
measured
(timer mon-
itoring)
Next step
Page changes to the Tolerances page.
Description of fields
Field Option
Use toleran- Check box
ces
Hz tolerance Editable field
V tolerance Editable field
Description
There is no automatic closure, only by user
interaction in a message panel. When a mes-
sage panel appears, press Yes to close.
All message panels are automatically closed
as defined by these individual time settings.
To define the action if a target point cannot
be measured.
The target point is skipped and the next tar-
get point in the list is measured.
The measurement to the target point is
repeated automatically.
☞
The option for Measure distance
in Measure & Target is also
changed for the repeated meas-
urement. If the option is changed,
then it is applied to all following
sets.
The measurement to the target point can be
repeated manually or the target point can be
skipped.
Check this box to sort the target points auto-
matically. The instrument works in a clock-
wise direction and finds the shortest path to
move between the target points.
When this box is checked, automatic moni-
toring of target points is activated.
When this box is not checked, automatic
monitoring of target points is not activated.
The Sets of Angles app applies.
Description
If checked, the entered horizontal, vertical
and distance tolerances are checked during
the measurements to verify accurate pointing
and measurements.
Tolerance for horizontal directions.
Tolerance for vertical directions
Sets of Angles - TS