Table of Contents
Advertisement
Plane Coordinate Sys-
tem
604
Key
Description
OK
To continue to the next panel.
Add point
To add points from the job to define the reference plane.
Available when creating a plane from previously stored
points.
Use
To change between Yes and No in the Use for the highligh-
ted point.
Delete
To remove the highlighted point from the list.
Meas app
To measure a point to be used for the plane. Available when
creating a plane by measuring new points.
Page
To change to another page on this panel.
Next step
Page changes to the 3D viewer page.
This panel is displayed if Use local plane coordinate system is checked in
Configuration, Parameters page.
Key
Description
OK
To compute and store the reference plane.
Meas app
Available when Point is highlighted. To measure a point to
define the plane direction.
Description of fields
Field
Option
Current ori-
Display only
gin point
X coordi-
Editable field
nate
Z coordinate Editable field
Point
Selectable list
Description
Point which has been selected as origin
point.
Enter local X coordinate of origin. The origin
is defined as the projection of the measured
point onto the calculated plane.
Enter local Z coordinate of origin. The origin
is defined as the projection of the measured
point onto the calculated plane.
Defines the direction of the Y axis.
Reference Plane & Grid Scan
Advertisement
Table of Contents
