Roads - Rail
Field
Option
Manual
Display only
super-eleva-
tion defini-
tion
Height of
Editable field
lower rail
Super-ele-
Editable field
vation left
Description
Negative cant value (example:
•
-0.1900 m)
Rail_017
•
Positive cant value (example: 0.1900 m)
Rail_018
☞
When Second Point of the tool-
box is active, the current cant
value is used for the cant differ-
ence calculation, not the value for
Measured super-elevation.
This field and the following fields are availa-
ble for Use super-elevation: Enter man-
ually in Rail Settings, Rail design page.
Defines the absolute height of the lowest rail
at the defined chainage.
Defines the superelevation at the left rail.
•
When working with horizontal align-
ments only: If the superelevation is rota-
ted around the left rail, the supereleva-
tion would be zero.
When working with horizontal and verti-
•
cal alignments: If the track is rotated
around the left rail, the vertical align-
ment would coincide with the left rail
and the superelevation would thus be
zero.
801