Table of Contents
Advertisement
Hidden Point Result,
Hidden point result
page
946
Field
Option
Rod length
Editable field
Next step
Take the measurements to prism 2 and, if desired, to prism 3. After the last
prism of the hidden point rod is measured, Hidden Point Result, Hidden
point result page is accessed.
Key
Description
Store
To measure the prism and exit the app.
Next
To store the hidden point and to access Measure Reflector
1 to take more hidden point measurements.
Page
To change to another page on this panel.
Fn Indiv ID
To change between entering an individual point ID different
and
to the defined ID template and the running point ID accord-
Fn Run
ing to the ID template. Refer to "26.3 ID templates".
Description of fields
Field
Option
Point ID
Editable field
Hz
Display only
V
Display only
Slope dis-
Display only
tance
Difference
Display only
in height
Description
The length of the rod can be adjusted before
the hidden point result is displayed. The rod
length always keeps the distances R1-R2 for
two prisms and R1-R3 for three prisms into
account.
Description
The name of the hidden point. The config-
ured point ID template is used.
The calculated horizontal angle to the com-
puted hidden point. ----- is displayed for
unavailable information.
The calculated vertical angle to the computed
hidden point. ----- is displayed for unavaila-
ble information.
The calculated slope distance to the compu-
ted hidden point. ----- is displayed for
unavailable information.
The calculated height difference from instru-
ment to computed hidden point. ----- is dis-
played for unavailable information.
Hidden Point on TS
Advertisement
Table of Contents
