Leica Captivate Technical Reference Manual page 875

Settings,
Orientate to object
page
Setup - TS
Field Option
The first Check box
resection
point will be
used to set
AR to 0.
Next step
Orientate to object: Page changes to the Orientate to object page.
For Setup method: Orientate to object, the settings on this page apply.
Description of fields
Field Option
Position Editable field
limit
Height limit Editable field
Rotations Editable field
limit
Shifts limit Editable field
Scale limit Editable field
Scale mode Free
Description
Applicable for Setup method: Resection.
When this box is checked, the angle right
direction is set to 0 in the direction of the
first measured resection point. The values
displayed for angle right during the following
measurements always relate to the first
measured point in the resection.
The angle right displays the horizontal angle
difference between the backsight point and
the current telescope position.
P0
GS_128
P0 Instrument setup
P1 Backsight point
P2 Point in direction of current telescope
position
a
Azimuth
b
Angle right
Description
Defines a position accuracy of the target
point.
Defines a height accuracy of the target
point.
Defines a rotation accuracy for the calcula-
tion.
Defines a shift accuracy for the calculation.
Defines a scale accuracy for the calculation.
The scale factor is calculated throughout the
setup routine and applied on all further
transformations.
P1
P2
875