Table of Contents
Advertisement
Coding
The used codes are shown in the code box list. The code box for the latest
code is at the beginning of the list. Use the up and down arrow key to select a
code from the code box list.
For the Measure, Measure to line, Stake road and Check rail apps, the current
list of up to eight code boxes can be stored to a template and reloaded. Refer
to "37 Apps - The Toolbox".
The metadata of a code box is editable. Tap on specified parts of a code box.
Or use the key combinations listed in the table.
Part in
Key combination
code box
Multi on
Multi on
Multi off
Define
Define
or type in a number
Define
or type in a number
Description
Multicoding
To measure one point but store it
multi-times. The stored points have
different point IDs and codes but the
same coordinates.
The number of selected codes
defines the number of stored points.
Up to eight codes are selectable.
Multicoding is enabled but not selec-
ted
+ Tap into
Multicoding is enabled and selected
check box
Multicoding is disabled
Code
Code
Stringing
Surveyed points with the same code
and stringing metadata are strung
together on one line. The stringing
metadata is linked to the line ID.
The stringing icon is visible when
linework is defined to be created.
String+
To increase the number of strings by
one.
String-
To decrease the number of strings by
one.
327
Advertisement
Table of Contents
