Table of Contents
Advertisement
Settings,
Colour scale page
982
Next step
Page changes to the Colour scale page.
Define the colours for distance ranges. When the surfaces are compared, the
colours show the distance ranges to the reference plane in the 3D viewer.
The colour range corresponds to the legend in the Measure Mode panel.
Settings, Colour scale page
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Insert
To add a line for distance and colour definition. The new line
is inserted below the line which is highlighted.
Delete
To remove the highlighted line.
Page
To change to another page on this panel.
Fn Load
To load a template for the colour scale range.
The templates are stored in the instrument configuration.
Templates can not be copied to another instrument.
Fn Save
To save the current definition of distances and colours as
template for the colour scale range.
Measure Mode
Inspect Surfaces
Advertisement
Table of Contents
