Table of Contents
Advertisement
Road Settings,
Heights page
Roads - General
Field
Option
Following
arrow
Facing sun
Point ID
Selectable list
Navigational
arrow types
Direction &
distance
In/out, left/
right
Switch to
Check box
bulls-eye
when 0.5m
(1.5ft) from
point
Beep faster
Check box
when get-
ting close
to point
Distance to
Height, Hor-
use
izontal dis-
tance or
Position &
height
Start within
Editable field
Next step
Page changes to the Heights page.
☞
The following field is shown in the Stake and Check methods except
for Slope and Manual slope.
Description
The direction of the orientation is from the
current moving direction to the point to be
staked. The graphical display shows an arrow
pointing in the direction of the point to be
staked. The current position must have
moved at least 0.5 m for the orientation to
be calculated.
For GS:
The position of the sun calculated from the
current position, the time and the date.
Available for Help me navigate: Facing
point (design data). To select the point or
line to be used for orientation.
The method of staking out.
The direction from the orientation reference,
the horizontal distance and the cut/fill are
displayed.
The distance forwards to/backwards from the
point, the distance right/left to the point and
the cut/fill is displayed.
When this box is checked, a bulls eye bubble
is shown in the stakeout graphic when less
than half a metre from the point being
staked.
The instrument beeps when the distance
from the current position to the point to be
staked is equal to or less than defined in
Start within.
The closer the instrument is to the point to
be staked the faster the beeps are.
Available when Beep faster when getting
close to point is checked. The type of dis-
tance to use for the stake beep.
Available when Beep faster when getting
close to point is checked. The horizontal
radial distance, from the current position to
the point to be staked, when a beep is to be
heard.
631
Advertisement
Table of Contents
