Table of Contents
Advertisement
Define Task panel
Roads - Road
Next step
OK accesses the Define Task panel.
Key
Description
OK
To continue to the next panel.
Slope
Available for Stake: Local manual slope. To define the
slope parameters. Refer to "45.2.3 Advanced Slope Settings".
Shifts
To apply horizontal and vertical shifts to the selected ele-
ment. Refer to "43.4 Working with Shifts".
Load
To load a task. Refer to "43.5 Tasks".
Save task
To save the settings as a task. Refer to "43.5 Tasks".
Page
To change, depending on the selected method, to Hinge
offset and/or 3D viewer page.
☞
☞
Fn Settings
To configure the app. Refer to "43.3 Configuring Roads
Apps".
The fields available depend on the selection for Stake in Task.
Description of fields
Common to all methods
Field
Option
Layer
Display only
or selectable
list
For Stake: Line
Field
Option
Working
Editable field
chainage
Any line can be selected on the 3D viewer page.
Import dxf lines to a design job before using for
Roads. Refer to "35.6 Context Menu".
Description
The selected layer in the Road job.
Description
The chainage for the stake/check survey. The
chainage can range between the start chain-
age and the end chainage. The default is the
setup point for TS and the current position
for GS.
741
Advertisement
Table of Contents
