Table of Contents
Advertisement
54.3
Description
Requirements
Access
Connect
926
Timed Measurements
Surveying regulations in some countries require that several instruments in a
session start the point measurement simultaneously at a predefined time.
Timed measurements are possible for all types of GS operations, except for
real-time base operations.
Automatically start measuring point on entering the Measure app:
•
Timed is configured in GS Quality Control, Advanced page. Refer to
"25.3 GS quality control".
Time at point is configured for one of the lines in one of the pages. Refer
•
to "26.2 User defined pages".
For RTK rover:
Select Leica Captivate - Home: Measure.
Description of fields
Field
Option
Start time
Editable field
Time to go
Display only
Description
The current local time with the seconds
rounded to 00, for example for the current
local time 07:37:12 it is 07:38:00.
Type in the start time in hours, minutes and
seconds for when the point measurement
begins.
Press Measure. The point measurement
does not start yet. The name of the field
changes to Time to go.
The countdown time in hours, minutes and
seconds before the point measurement
starts automatically. The point measurement
starts when it is 00:00:00.
Then, data is logged as configured in the
working style. Any measurement counter-
defined to be used in a page is displayed and
starts incrementing. The name of the field
changes to Time at point.
Measure - GS
Advertisement
Table of Contents
